Calibration curve

In analytical chemistry, a calibration curve, also known as a standard curve, is a general method for determining the concentration of a substance in an unknown sample by comparing the unknown to a set of standard samples of known concentration.In more general use, a calibration curve is a curve or table for a measuring instrument which measures some parameter indirectly, giving values for the desired quantity as a function of values of sensor output.[2] Such a curve is typically used when an instrument uses a sensor whose calibration varies from one sample to another, or changes with time or use; if sensor output is consistent the instrument would be marked directly in terms of the measured unit.For most analyses a plot of instrument response vs. concentration will show a linear relationship.The operator can measure the response of the unknown and, using the calibration curve, can interpolate to find the concentration of analyte.The data – the concentrations of the analyte and the instrument response for each standard – can be fit to a straight line, using linear regression analysis.For instance, chromium (III) might be measured using a chemiluminescence method, in an instrument that contains a photomultiplier tube (PMT) as the detector.The corresponding value on the X-axis is the concentration of substance in the unknown sample.(Instrumental response is usually highly dependent on the condition of the analyte, solvents used and impurities it may contain; it could also be affected by external factors such as pressure and temperature.)Many theoretical relationships, such as fluorescence, require the determination of an instrumental constant anyway, by analysis of one or more reference standards; a calibration curve is a convenient extension of this approach.The calibration curve for a particular analyte in a particular (type of) sample provides the empirical relationship needed for those particular measurements.Some analytes – e.g., particular proteins – are extremely difficult to obtain pure in sufficient quantity.
A calibration curve plot showing limit of detection (LOD), limit of quantification (LOQ), dynamic range, and limit of linearity (LOL).
An example of a standard curve showing the absorbance of different concentrations of protein (two trials for each measurement). The mass of protein in a different sample is determined by determining where on the standard curve it should go – in this case, 30 milligrams.
Samples treated with the Bradford assay. The brown sample (lower absorbance) contains no protein, while the blue sample (higher absorbance) contains protein. The amount of protein in the second sample can be determined by comparison to a standard curve.
limit of detectionlimit of quantificationanalytical chemistryinternal standardanalytemeasuring instrumentsensorpressure transducerpressuretransducerabsorbancelinear regressionchromiumchemiluminescencephotomultiplier tubeBradford assayreagentCoomassie brilliant blueargininearomaticamino acidsspectrophotometerleast squaressolventsfluorescencestandard additionion selective electrodeclonogenic assayCurve fittingLogarithmic scaleProteinSerial dilutionWayback MachineBibcodeInstrumentationAtomic absorption spectrometerFlame emission spectrometerGas chromatographHigh-performance liquid chromatographInfrared spectrometerMass spectrometerMelting point apparatusMicroscopeOptical spectrometerCalorimetryChromatographyElectroanalytical methodsGravimetric analysisIon mobility spectrometryMass spectrometrySpectroscopyTitrationDilutionDissolutionFiltrationMaskingPulverizationSample preparationSeparation processSub-samplingChemometricsMatrix effectIsotope dilutionAnalystAnalytica Chimica ActaAnalytical and Bioanalytical ChemistryAnalytical Biochemistry